Made to order Face Masks (Fabric choice)

$10.00$20.00

1 reusable cloth facemask in your choice of fabric.  With or without nose wire and filter pocket. No pressure behind the ears, and easily adjustable!

~ Made to order ~
It will be about week before your order will be posted!

These face masks are made from 3 layers cotton (Printed outer with 2 layers plain cotton inner), with optional nose wire and optional pocket opening so that you may slide an extra filter layer inside if you wish.  Drawstring slider head tie (Colour will vary to best match mask), designed to be comfortable and easy to use.  You can adjust the slider bead to get a custom fit on your head.   Also allows you to loosen the top and let the mask hang at your neck while not in use. The bead slider should stay put until you slide it, but the strings are long enough for you to tie a bow/knot as well if you wish.

(Why are these masks more expensive?  Given the cost of materials and labour, this is how much I should be charging for the masks – but I wanted to be able to offer inexpensive masks to those who need them. So this is my compromise. If you want a fancier mask (with nose wire and your choice of fabric), then you pay the normal price. If you want the cheaper option that has no fabric choice and no nose wire, then you have that option! 😀 )

Clear

Description

Medium (female) size is approx:
12cm from bridge of nose to edge of mask
16cm from bridge of nose to under chin
8cm wide at edge of mask

Large (Male) size is approx:
14cm from bridge of nose to edge of mask
21cm from bridge of nose to under chin
8cm wide at edge of mask

Masks shown in the photos are examples only, and include fabrics no longer available.  The mask modeled on my 17 year old (with awesome iso-hair 😉 ) is the medium with no nose wire – to give you an example of how they fit on your face.  The nose wire will bring the nose section in closer, but the fit should be pretty good without it.

These are made using a pattern I created, based on what fits me best after trying a few other mask patterns and tweaking a pattern to my own design (a little more coverage under the chin).  I can’t guarantee it will fit anyone else.  I’d suggest buying one to check the fit, then if you’re happy then get some more.

Please note that prints with larger designs (like “Star Wars”, “Forest” and “Pegasus”) will be cut from this fabric but might not include the same parts of the print that the example swatch shows.


Disclaimer – I cannot guarantee fit nor effectiveness.  These masks will not protect you against covid-19, nor will they protect others from catching it from you.  You must still practice social distancing, wash your hands and stay home where possible!


If you can sew your own, please do!  
I’ve tested out a few free patterns and the ones I personally found the best fit for me and those I’ve tried them on are these
(No affiliation, just ones I’d googled, tried and liked)
https://sweetredpoppy.com/how-to-sew-a-fitted-fabric-mask
https://www.craftpassion.com/face-mask-sewing-pattern/
https://youtu.be/-t_Gz3lGwF8

I also have my mask pattern available for download too
Obsi’s Mask Pattern

Here’s some of my mask-making tips:
When making masks, I suggest making one from just 2 layers of some fabric you don’t care about, just to test the fit.  Check a few patterns and see which fits you best.  Then make your proper masks using that pattern.  Most guides recommend using 3 layers of a tightly woven cotton for the mask.  Eg not something loose weave like muslin.  Standard quilting cottons are likely to be best.  Some guides say to use a water resistant outer layer, but just remember you need to be able to breathe through it.

You can add a metal nose piece to help the mask fit across the nose better so it doesn’t leave as much of a gap.  Many of the DIY guide include how to add a nose piece.  If you’re not sure if you want a permanent one in there (eg if you’d like to be able to remove/replace it) – try sewing a piece of ribbon with one open end to act as a casing you can slide the nose piece into, and remove if needed.

With testing a few mask designs and tie options, I personally find the drawstring and bead method to be the most comfortable and easy to use. I found fabric ties fiddly and elastics have to be the right size or they can be too tight or too loose (and can hurt behind your ear).  So even if you use another mask pattern, I’d suggest trying the drawstring sliding bead tie method I use  (I didn’t create the idea, it’s one I saw someone else using).  I found using “tshirt yarn” for the drawstring tie to be the best – it’s soft and usually has a slight stretch.  Some people use paracord.  I found ribbon or twill tape to be too slippery to hold position.  The tshirt yarn fits a “pony bead” (large opening plastic bead) well, which means you can use the bead as a slider to adjust the fit and it should stay put without even needing to tie the strings.    I find I don’t need to tie the ends off (the bead doesn’t seem to loosen on its own) but make sure the strings are long enough to allow for tying as well.

A tip for threading the pony bead – thread one end into the bead first, then open the yarn up and lay the other end against the unrolled yarn that is going through the bead, roll it back up and pull the yarn through the bead.  I found that the easiest way 🙂

Other DIY mask guides with the drawstrings tend to have the tie up at the base of the neck.  I personally find that the top of the head is better for the ties as the base of the neck seems to catch your hair more.  So that’s why I do mine at the top.  But you can put it wherever works best for you. Another advantage of the drawstring method is that you can later change the string if you decide you’d rather ear elastics or something else.